Custom alloy wheels wholesale provider with jjjwheel.com

Alloy wheels manufacturer and supplier with jjjwheel.com? We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. See more info on custom alloy wheels.

One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.

Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.

The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.

Flow formed wheel manufacturing process first requires processing the blank with low-pressure casting, then heating the wheel blank, while gradually extruding the final form by rotating the press through the machine. Under the appropriate temperature and pressure of the press, the metal molecules are more dense and fibrous, which can bring higher strength and toughness than low-pressure casting, and the rim after spinning has a thinner cut, so the overall weight of the wheel is reduced. Welcome to inquire about wholesale flow formed wheel price, JWHEEL is the best choice of forged wheels manufacturers. See even more info on https://www.jjjwheel.com/.