Excellent valve factory: Surge anticipating valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When a power failure take place, the abrupt stopping the pump can cause dangerous surges in the system which could result in severe equipment damage. Power failure to a pump will usually result in a down surge in pressure, followed by an up surge in pressure. The surge anticipating control valve opens on the initial low pressure wave, diverting the returning high pressure wave from the system. In effect, the valve has anticipated the returning high pressure wave and is open to dissipate the damage causing surge. The surge anticipator valve will then close slowly without generating any shock. Looking for quality surge anticipating control valve, visit here today! Read additional details on industrial valve supplier.
Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.
How to Set an Altitude Valve? Setting an altitude valve correctly is crucial to ensure proper water flow and pressure regulation in a system. Here are some steps to guide you on how to set an altitude valve: Familiarize yourself with the manufacturer’s instructions: Each altitude valve may have specific guidelines for setting it up. Make sure you read and understand these instructions thoroughly before proceeding. Determine the desired water level: Based on your system’s requirements, identify the ideal water level at which you want the altitude valve to maintain. This will depend on factors such as building height and water usage. Adjust the pilot control settings: Altitude valves typically have a pilot control that regulates their operation. Use the appropriate tools to adjust this control according to your desired water level.
NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. Discover extra info on shsuotevalve.com.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
A lug type butterfly valve is a versatile valve commonly used in various industrial applications for regulating or isolating the flow of fluids. It derives its name from the lugs or ears located on both sides of the valve body, which allow it to be easily installed and secured between flanges in a pipeline system. The lug style butterfly valve consists of a disc that rotates on an axis within the valve body, controlling the flow by either fully opening or closing the passage. Lug type butterfly valves are known for their compact design, lightweight construction, and ease of installation. They offer efficient flow control, excellent sealing capabilities, and low pressure drop. With their simple operation and reliable performance, lug type butterfly valves are widely used in industries such as water treatment, HVAC, chemical processing, and food and beverage.