Quality led panels factory: How to choose LED landscape lighting? Before buying LED outdoor landscape lighting, there are some essential things to take into consideration. The first thing to consider is how much light you need? You can choose from spotlights, floodlights, or wall packs. There are different wattages available depending on the size of your place. Another thing to consider is the kind of light that you need. As there are three types of lighting fixtures, you can choose from fully shielded, partially shielded, and non-shielded lighting fixtures. Before buying LED landscape lighting, you also need to consider the lumens per watt rating. This reading will tell you how much light is being put out by a fixture. A lower number means that the fixture emits more lumens, while a higher number indicates fewer lumens emitted from that fixture. Find more information at magnetic track light.
How difficult is it to install them? Installing magnetic track lighting is easy. You can install it by yourself, and there’s no wiring involved. Simply mount the track to your ceiling, attach the lights to their channel, mount the metal brackets through powerful magnets, aim them where you want them, plug them in, and turn them on! 4 different installation solutions for magnetic track light system: Recessed installation-Popular way, it is suitable for a new building; surface-mounted. It is easy to do an installation without a ceiling. Suspension installation is perfect for the dining room, meeting offices, etc. Trimless recessed installation, only use screws to fix it onto the hole in the ceiling.
In general, when people say flood lights or spotlights, they mean the same thing. But technically, there are some differences in beam angle. Generally, flood lights have bigger beam angle like 90/120° which is an application for Lighting up the whole scene, suitable for big area lighting. However, the spotlight fixture is with a narrow beam angle like 25/45/60°, These lights look like a beam of light, and generally, the straight-line distance illuminates will be farther than floodlights. Suitable for local lighting to highlight the characteristics of objects.
DOB Led flood lights: “DOB” is the abbreviation of “Driver on board”, which means that the power supply is on the board. The so-called DOB led floodlights means that the AC power supply and led chips are integrated on the PCB at the same time. It is also called driverless AC LED flood lights. The cost of this luminaries is the lowest, but in terms of quality, it is not as good as floodlights with constant current drive. Moreover, the input voltage of most DOB Flood lights can only be 220-240VAC, and the power factor is generally only about 0.5-0.6. Africa, Middle East, Southeast Asia, South Asia, South America non-developed markets. This kind of lamps is not suitable for commercial and industrial projects and places with strict quality requirements.
Which battery is best for solar street light? The best battery for solar street lights is a lithium-ion battery. Lithium-ion batteries are lightweight, have a long lifespan, and are highly efficient. They are also able to withstand extreme temperatures and are resistant to corrosion. Why do solar street lights not work at night? Solar street lights are powered by solar energy, which is collected during the day. At night, when there is no sunlight, the solar street lights cannot collect energy and therefore cannot work.
High lumens. most of them are about 100lm/W output. Even it can be up to 150lm/W output for best outdoor flood lights in markets, saving much more 80% energy than traditional halogen flood lights or HPS floodlights. Longer lifespan. The service life of LED reflector light is at least twice as long as that of a traditional projection lamp, which can reach 50000hrs. The outdoor led projection light produced in 2013 is still in normal operation, and its service life has exceeded 7 years. Technical Support: It is ok to support IES files to do Dialux simulation, providing installation, maintenance guidance, or technical training and lighting design solutions.
There are 3 types of magnetic tracks for the smart dimmable magnetic track light system: recessed magnetic track for embedded installation or trimless installation, surface mounted magnetic tracks for surface ceiling or wall mounted, and suspended installation with steel ropes. Black magnetic track, white magnetic tracks options. Each magnetic rail track can be cut off freely. The standard length for magnetic tracks is 1000mm, 2000mm, and 3000mm.
The magnetic pendant light is a cylinder downlight with hanging ropes for suspended installation as decorative lighting, It is generally used as auxiliary lighting and is mostly used in the study room, bedside table, above the dining table. The CREE/OSRAM/PHILIPS COB chip brings a perfect lighting performance, Magnetic track lighting is a linear track system with magnetic rail and removable magnetic lights, the entire magnetic track lighting system is driven by low-voltage DC24V or DC48V.On the low-voltage magnetic guide rail, various types of lamps such as magnetic line lights, magnetic spotlights, and magnetic chandeliers can be safely combined, freely moved and disassembled. Just read this blog to know the details about it if needed.
What should I look for when buying solar street lights? Quality of the solar panel: Make sure the solar panel is of good quality and is able to generate enough power to charge the battery. Battery capacity: Make sure the battery has enough capacity to power the lights for the desired amount of time. you can check this blog: “What types of battery is the best for solar street lights?” to know more information about batteries. Lumens: Make sure the lights are bright enough to provide adequate illumination.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Discover additional info on https://grnled.com/.
OEM ODM Service, we can do production or design according to customer’s requirements with much more experience than expected. We always keep the innovation in function and technology for all led lights, producing the best-led products which are popular in markets. And also provide relative technical support, for example, the IES Files to do Dialux simulation or technical training, etc. We will do all legal things for our customers.